1 / 4
Dual Lane Connector Bridge 1/64 Diecast Car Track Female — image 1
1 / 4

Dual Lane Connector Bridge 1/64 Diecast Car Track Female

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stabilize and connect two tracks side by side. Requires 4 male standard Diecast track connectors to put track together

Rating
0 / 5
Likes
16
Downloads
47
Makes
0
Views
181
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Stabilize and connect two tracks side by side. Requires 4 male standard 1/64 Diecast Car Track connectors to connect track together. 

The Built in Supports to this dual lane connector bridge snap/break off easily with pliers or even your fingers depending on the material. Print profile provided for optimal printing. 

PRINT SETTINGS

PETG - 0.18 layer height on 0.6 (or 0.4) nozzle, 15% gyroid infill, 2-3 walls, 2-3 top layers, IRONING ON ALL TOP SURFACES - at the very least for the inverse support pieces (only 1 layer required for walls/top/bottom layers for support pieces). The 0.25mm gap allows twisting and breaking off the support for like materials (Can use PLA as well, but PETG is more flexible). Works pretty well to break off currently. 

OR

PLA/PETG Mix - Use PLA for the inverse connector pocket bodies. PETG for the main track. I still recommend ironing the top of the supports. 

NOTES

I probably have hundreds of hours perfecting these tracks, with dialed in connector areas and physical printing/testing. No more hokey custom connector pieces. Print with confidence!!

Purchasing

If you don't have a 3D printer and would like to purchase this item, I would be happy to print and ship it to you. Send me a message here on printables. Located in USA but will ship globally if required. Shipping will vary and affect cost. 

Tags