1 / 10
Settlers of Catan Organizer - 2025 Edition — image 1
1 / 10

Settlers of Catan Organizer - 2025 Edition

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A New Box Insert for Settlers of Catan replacing the paper Organizer from the Standard Box

Rating
0 / 5
Likes
14
Downloads
78
Makes
0
Views
959
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Settlers of Catan Organizer Inlet - 2025 Edition

Hey yall,

I bought the newest redesign of Settlers of Catan a few weeks ago and it has been annoying me how chaotic and unorganized the new paper Organizer of the game is, so I designed my own. 

                                                                                         Before

 

                                                                                            After

 

It neatly holds every part in its own compartment without much rattle or mixing when the box is shaken around.

With my 3mf the print time was about 16 hours in three print beds. I added mouse ears cause the big parts are prone to warping. Used about 500 grams of PLA, thoug I am sure you can print it a lot lighter when tweaking the settings. I experimented with a shelled out version without much luck - I attached the file for everyone interested.

I hope you enjoy and I would love to hear feedback and see makes!

Printing

-Note: the included 3mf has the border fields at an angle and the Infill angle aligned so that the assembly has a uniform look. If you print at your own settings, keep that in mind.

-No supports needed with included 3mf (excluding shelled out version)

-Use Mouse Ears or Brim to prevent warping

-5% Gyroid Infill for stability and still good bridging performance

-PLA 0.2 layer height

Installing

-Print every part before putting any in the box, they will go in together!

- Lightly hold the parts together using the included attachment guides in the follwing order:

  • Main Body into Card Holder (Right half)
  • Dice into Border Pieces (Left half)
  • Both halfes into eachother

-Grab the assembly from above and gently push into the game box. It is a tight fit! Gamebox inner corners can we damaged if not careful!

-For removal, very carefully try to lift all parts at the same time. It is not designed for frequent removal!

 

 

Tags