Magikarp Hueforge - Panic Attack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 142.93x200mm in size
Filaments Used:
PLA Elegoo Black
PLA Elegoo Navy Blue Matte
PLA Elegoo Orange
PLA Elegoo Yellow
PLA Elegoo White
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Navy Blue Matte
At layer #21 (1.76mm) swap to Orange
At layer #25 (2.08mm) swap to Yellow
At layer #30 (2.48mm) swap to White for the rest.
You can start with navy blue instead of black if you'd like. I designed it with the black because I have plenty of black filament but only one roll of navy blue. None of the black is actually visible from the front.
This is the first hueforge model I've created, so feedback is always welcome.