Super Drum 34 | Talon comaptible 34 round nerf half-dart drum
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
little brother of the Super Drum 70
- Rating
- 4.938 / 5
- Likes
- 167
- Downloads
- 477
- Makes
- 16
- Views
- 3,616
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOT TO BE SOLD BY FRONTLINE FOAM, BLASTERGUYS OR POTATOFEEDERNERF
The famous Super Drum 70, but easier to wield.
Assembly is exactly the same, but uses less hardware. the main benefit of this is that you can use Super Drum 70 HW kits for this Drum as well!
If you want to sell the Drum or hardware kits to it, please contact me first.
licensed sellers are:
Capital 3D: https://www.capital3d.au/products/super-drum
Based in Australia
ChaosBunnyCustoms: https://www.chaosbunnycustoms.com/collections/super-drum
Based in the US
OUTOFDARTS: https://outofdarts.com/products/kptn-a-super-drum-magazine-hardware-kit
Based in the US
Blaster-Time/Foam Focus: https://www.blaster-time.eu/shop/kptn-a-super-drum-magazine-hardware-kit/
Based in the Netherlands
Containment Crew: https://www.containmentcrew.com/product-category/brand/kptnautismus/
Based in the US
BOM:
-3-6x drum springs
-11x m3x10 button/socket head screws
-9x M3x4x5mm brass inserts
-2x 6804-ZZ or 2RS bearings
-ballpoint pen spring (~4,5mm OD, ~25mm length)
-one extra screw and heatset insert required for the molle clip version
-silicone spray lube
Supports are needed only for your neck of choice, the knob and the fan. every part is preoriented.
DISCLAIMER: Some slicers will auto orient the neck so it stands up. we have found it to be more reliable with the “kptnautismus” inscription facing downwards.
you choose the neck based on how far your magazine is sticking out, you measure it by sticking a talon mag into your blaster, marking where the blaster stops and measure the length of the inserted part of the magazine (minus the feed lips). now choose the closest size that is larger than your measurement.
you'll need extra dummies too.
the 55mm neck takes 3 dummies.
the 90mm neck takes 4 dummies.
the 130mm neck takes 5 dummies.
the 165mm neck takes 6 dummies.
the 200mm neck takes 7 dummies.