Paramotor Propeller Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Spinning Paramotor Prop Wall Mount
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
I designed this spinning propeller wall mount to repurpose a damaged paramotor propeller. The bearings allow the propeller to spin smoothly even with a slight breeze. Attach to the wall using either drywall mounts or directly into the stud.
Parts List Below:
Qty 2x - Bearing 3003-2RS (available from VXB or other online Vendors. Non RS version is unsealed and should only be used indoors.) A washer or Spacer Should be used between the two bearings to prevent over preloading during assembly.
Qty 1x - 5/16 bolt x 1.25 thread
Qty 1x - 5/16 nut (Locking or use Thread Locker)
Qty 6x - M6 Nuts
Qty 6x M6 Socket Head Bolts- the length will depend on the thickness of your propeller hub.