1 / 2
Pine64 Pinecil Grip Sleeve
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pine64 Pinecil Grip Sleeve
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 22
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
TPU grip sleeve for Pine64 Pinecil. only tested with V2. should work with V1
Print out of very soft filament. my 95A Tpu was pretty hard to get on. i would recommend taking a look at TPE, those get even softer.
there should be enough space for an M2 thumbscrew, although you might need to use a longer one than you've previously been using.