1 / 2
Simple Fixed-angle Knife Sharpening Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single-piece fixed-angle sharpening jig
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 50
- Makes
- 0
- Views
- 696
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This jig helps you to preserve a fixed angle during knife sharpening on a whetstone.
Print it from any material you wish; it is sufficient to use light infill and only two perimeters to make the jig light. Then, add:
- 1× M4 hex nut,
- 1× M4x25 screw,
- 4× M3x16 screw.
Mount the knife in the jig, and use the back legs to set the angle. You can use the lines in the back to make both sides the same length. Enjoy sharpening!