Shrink the M1 Mac mini!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make your M1 Mac mini even smaller with this mod by removing the overkill power supply, cooling assembly, and more!
- Rating
- 4 / 5
- Likes
- 113
- Downloads
- 1,785
- Makes
- 1
- Views
- 25,032
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Why:
When Apple launched the M1 Mac mini, it brought serious performance improvements over the outgoing generation; however, the design remained unchanged and the majority of the parts were brought over from the 2018 Mac mini. With the low TDP of M1, they're completely overkill and unnecessary. We set out to make the Mac mini smaller without compromising on performance.
How:
Reference our video about the project here. The “Assembly Instructions” will help you put it together. If you elect to use MagSafe as our original design calls for, reference “Wiring Schematics. (coming soon)"
What:
- 2020 Apple M1 Mac mini
- DC/DC Conversion Board (this same board appears under a lot of different brands on a lot of different sites)
- PSU that can supply at least 12V and up to 65W (4A). We used the Microsoft Surface 15V/4A adapter.
- A1398 MacBook Pro MagSafe 2 DC-IN Power Board
- MagSafe 2 cable (you can also cut an original MagSafe charger)
- M2 heat set inserts
- M2 screws in 4mm and 6mm