1 / 12
Medusa & Spartan Pop-Up Wallet (Print-in-Place) — image 1
1 / 12

Medusa & Spartan Pop-Up Wallet (Print-in-Place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print-in-place pop-up wallet for five cards; Medusa or Spartan mask reveals your ID photo through eye cutouts on insert.

Rating
0 / 5
Likes
5
Downloads
20
Makes
0
Views
202
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

A slim, print-in-place wallet that fans five ID-1 cards (credit card size) with a single press. This contest edition ships with two mythic faceplates—Medusa or a Spartan helm. Slide in a card with a portrait (e.g., national ID): the faceplate frames the photo and the eyes line up with the cutouts, creating a playful reveal when viewed through the wallet window.

  • Mechanism: internal cam lever pops cards into a staggered stack for quick selection; an integrated detent keeps them seated during carry.
  • Form factor: ~8.5 mm thin, pocket-friendly, no assembly, no hardware.
  • Clearances: engineered with 0.30 mm gaps for reliable print-in-place movement.
  • Handedness: lever is left-side by default; mirror in your slicer to move it to the right.

Printing notes

  • Bed level is critical. Elephant’s foot can fuse the links—aim for minimal first-layer squish or use a small negative Initial Layer Horizontal Expansion.
  • Print PLA (opaque recommended), 0.20–0.24 mm layers (0.16–0.20 mm for finest feel), 0.4 mm nozzle, 3–4 walls, 12–18% infill.
  • Light post-processing: break in the mechanism by cycling the lever a few times after print.

Card compatibility

  • Optimized for flat cards (ISO/IEC 7810 ID-1). Embossed/raised text cards may slide less smoothly.
  • For the photo alignment effect, insert the portrait side toward the faceplate so the eyes meet the window.

 

What you get

  • 2 STLs (Medusa faceplate, Spartan faceplate), both print-in-place
  • Optional blank back logo area for your own emblem (slicer text/emboss recommended)

Have a specific printer/profile? Tell me and I’ll add a tuned quick-start (flow, temps, speeds) for your setup.

Tags