1 / 2
Wall Bracket for 2-Piece Windsurf Mast
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A first version of a wall bracket to hold a two-piece fiberglass windsurfing mast. Print strong! 50mm and 60mm sections.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I modeled it with two screw holes, the lower needing a low profile 90° driver to access (mini ratchet). I'm currently testing it with just the upper screws in place as the mast is not very heavy.
After living with this for a little while, I plan to make a second version that is parametric to hold other equipment and tools.
I printed in ASA, 0.20mm layers with 5 walls and 15% gyroid infill. Be very sure the material you use is suited for the load you expect it to hold!