Grip for Tecnam Aircraft Pilot Stick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement grip for the Pilot Stick in Tecnam P2008 (and other) airplanes
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 1
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Standard Digital File License
A replacement grip for the Pilot Stick in Tecnam P2008 airplanes.
The original grip is made of foam and is neither very convenient nor robust. This model provides a much better, ergonomic and long lasting alternative.
Print both halves standing upright in PETG V0 with 100% infill for stability. Carefully sand the planes between the halves after setting the heat-set inserts for proper fit.
Required parts:
1x Left Half (printed)
1x Right Half (printed)
8x Washer 4.3×7.6 (printed)
8x M4×8×6 heat-set inserts (shorter versions work as well)
8x M4×12 ISO 7380 hex screws (stainless, M4×10 works as well).