Recyclingfabrik MultiSpool desiccant container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desiccant container designed for the recyclingfabrik.com MultiSpool spools, used for refill filament.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
The desiccant container is designed to fit the MultiSpool required for refill filament from recyclingfabrik.com. The spools are available for download, which is really great as they only sell them in PLA and for use in the filament dryer I prefer to have them in PETG.
The desiccant container has a left handed thread to prevent opening the spool while opening a tight container. The funnel has a mark on the inside for desiccant filling and to not overfill the container, as air circulation during rotation is beneficial for the drying process. The openings in the grid are 1.7mm wide. Works well with ≥2mm desiccant beads.
I print everything with 3 vertical layer lines, 0.15mm layer height and in recycled transparent PETG to increase the chance of recycling after its end of life. The container and the lid are printed with 100% infill, the funnel is happy with way less (5%-10%).