1 / 5
bridging / overhang / curling / retraction / thin walls torture test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had problems with the fan shroud, so I needed a directional overhang / curling test.
- Rating
- 4.667 / 5
- Likes
- 57
- Downloads
- 601
- Makes
- 2
- Views
- 3,612
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- BSD License
I had problems with the fan shroud, so I needed a directional overhang / curling test.
- It will test overhang at four angles (30 to 60°) in all directions for curling issues
- bridging at 30, 50 and 70mm
- arcs at 2.5, 5 and 7.5mm radius (5, 10 and 15mm diameter)
- thin walls from 0.1mm up (mostly a test of the slicer, as it turns out)
retraction and z lift testing dots
Openscad source file included.Edit: new version with more supports and nothing below the bridges for better inspection. Also towers around the arcs to catch spaghetti without disturbing other tests.
Print instructions
Category: 3D Printing Tests