Hung Gar Kung Fu Earrings
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.34 – €0.42 net (excluding VAT)
For file: hung-kar-30mm-1side_0.25n_0.1mm_PLA_MINI_34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.38 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 33.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A pair of 3D-printable earrings featuring the iconic Hung Gar diamond emblem with its stylized Tiger and Crane design.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
These earrings feature the classic diamond-shaped emblem of Hung Gar kung fu, created by the Lam family lineage. Within the diamond, the stylized forms of the Tiger and Crane can be seen — symbols of strength, balance, and harmony at the heart of this martial art. Designed for easy 3D printing, the earrings make a unique accessory for martial artists, fans of kung fu, or anyone who appreciates meaningful cultural designs. Download the model, print it, and carry a piece of Hung Gar’s spirit with you!
Printing is easy, e.g., in PLA but you need a narrow nozzle. The standard 0.4-mm one is too coarse. I print with 0.25 mm and it's OK. There are two versions provided:
- one-sided. There is one colour change in the gcode file. Start with background, continue with foreground colour. It hangs on a loop.
- two-sided. There are two colour changes in the gcode file. Start with foreground colour, change to background and finish with foreground colour. It hangs through a small hole towards the top of the diamond.
Copyright notice: I am the author of the 3D model. The original diamond-shaped artwork in 2D was designed by Great Grandmaster Lam Cho.