1 / 3
Timetable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular timetable that helps you organize your week and when it falls the pieces turn into a fun little puzzle.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 29
- Makes
- 0
- Views
- 569
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When printing days of the week, subjects or times:
- Export the desired STL file to PrusaSlicer
- Select the model
- Select [P] Split to Parts at the top
This way you only print the parts you actually need.
Print settings
- Material: PLA works great
- Layer height: ~0.15 mm
- Optional: Use magnetic filament if you want to stick the timetable on your fridge
Parts
Depending on your print quality, pieces may fit perfectly, feel a bit tight, or be slightly loose. Don’t worry, you can easily make your own.
You can check Board hole sizes in PrusaSlicer or use the dimensions below:
- Days of week: 16 × 17 × 1 mm
- Time: 9.5 × 6 × 1 mm
- Subject: 20 × 10 × 1 mm
- Text height: 0.6 mm