1 / 2
Hitachi CH10FCH2 Miter Saw Zero Clearance Table Insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a blank table insert for the Hitachi CH10FCH2 10" miter saw
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 41
- Makes
- 1
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My main motivation was to replace the factory insert that I had melted while cutting metal with a cutoff wheel - having a zero clearance insert is just a nice side benefit.
My print settings:
- PolyLite ABS
- 0.2mm layer height
- 4 periperimetersmiters
- 15% gyroid infill (except for the “cut region” which was 100% infill)
- Scaled to 101.03% to compensate for ABS shrinkage
I used the included cut region STL as a mesh modifier in PrusaSlicer to create a ½" 100% infill area under the saw blade. You could also just print the whole thing with 100% infill but, I was concerned about warping (and long print times).