Command Strip Hook for Large 15 lb velcro type
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.81 – €0.99 net (excluding VAT)
For file: command hook large v1_0.4n_0.2mm_PLA_MINIIS_49m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.90 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 48.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For usage with command 15lb large picture hanging strip https://a.co/d/ifZrx9t The strips are recessed into the hook.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
The difference this hook and other ones I've tried and downloaded are two things:
- This one is for the velcro type of command strips so I've made it recessed
- The support is underneath the hook whereas most of the ones I've tried the support was above the hook which doesn't make sense because the load is trying to pull itself away from wall.