1 / 11
QRP Labs LPF Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple board for QRP Labs Low Pass Filters. Can be used in-line or for testing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Note: The 2x12mm screws are just a tad too long and will push thru the bottom of box and make little feet. If printing in resin, use shorter screws or they will push thru and fracture print.
Build Info:
20x80mm Solder Breadboard [https://www.amazon.com/dp/B0f7QZ9VSW]
SMA Edge Mount Connectors [https://www.amazon.com/dp/B09N1RBBFX]
0.33mm Enamel Wire [https://www.amazon.com/dp/B0CYNVB8VZ}
M2x2mm Heat Set Inserts [https://www.amazon.com/dp/B0D5V3TZLB]
M2x12mm Machine Screws [https://www.amazon.com/dp/B0CQJZCC9T]