1 / 4
SOVOL SV08 MAX AUTO FEEDER BUFFER PTFE TUBE FILAMENT GUIDE — image 1
1 / 4

SOVOL SV08 MAX AUTO FEEDER BUFFER PTFE TUBE FILAMENT GUIDE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Guide your PTFE tube to help reliable operation!

Rating
5 / 5
Likes
51
Downloads
542
Makes
6
Views
2,107
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Help guide your PTFE tube out of the top of your auto feeder buffer to ensure reliable operation & stop it getting pulled over too far & jamming!

BOM:

No hardware needed

 

PRINTING:

Print PETG/ASA/ABS 0.2-0.3 layer height, 4 walls. Lay model flat on base, no supports.

Note: The base of the unit is 0.3mm so be sure to set your first layer to 0.3 & make sure your Z offset is correct so its good!

 

ASSEMBLY:

Slide the auto feeder into the guide & attach to the printer using original bolts. Slide the PTFE tube into the top.