Nikon SB-800 Flash Softbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a small softbox for my Nikon SB-800 flash that is still small enough to carry it around. The main part slides…
- Rating
- 0 / 5
- Likes
- 54
- Downloads
- 214
- Makes
- 0
- Views
- 1,410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I wanted a small softbox for my Nikon SB-800 flash that is still small enough to carry it around.
The main part slides over the flash head and has also has a hole for a M3 screw and nut to clamp it down if it sits to loose (works great for me without that). For the inside I used aluminum foil as reflector (one side of the foil is a bit more dull, I used that side). I also uploaded a PDF with a printout template for the Reflector (but leave one side a bit longer so the 2 ends overlap). I glued the foil to the paper cut it out an then glued everything inside the box.
As a diffuser I use a tissue and it works great but maybe I am going to replace them with a piece of cloth or photo gel. To provide a better fit and easier switching of the grids I sticked a piece of foam rubber where the grid goes in. Sits a bit tight like that but it won't fall out.
UPDATE: Added4 different grids for now,one with 60°, one with 46°, one big grid just for softbox use without directing the light and the frame only.
Maybe I am going to buy a Yongnuo 560 (since its quite popular for cheap flashes) and make another version for it.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2 Extended
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,15
Infill:
30-100
Notes:
Nozzle 0.4 with 0.47 extrusion with for the grids (wider and the grid won't print)
Category: Camera