1 / 1
La Marzocco Linea Mini rear feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw on rear feet for the Linea Mini
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Requires M6 nut to be placed inside, use glue to keep in place if necessary. Use a high infill percentage (I used 70%) to make sure the weight is well supported.
PLA WILL slowly creep under the constant load of the weight of the machine - you should probably print with PETG.