1 / 6
Sonicware Liven Desktop Tilt Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for the Sonicware Liven synthesizers
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
This stand allows for Sonicware Liven sized synthesizers to be placed at a 20° or 45° angle on a desk.
You will also need:
- 3 10mm pipes/rods/dowels
- adhesive backed foam rubber / EPDM pads
The parts can be printed either in 6mm width or 25mm width - if you use the 6mm wide ones I'd recommend using four like I did, the 25mm parts will be plenty strong enough to work as a pair.
I sized my rods to be 220mm, that way the supports end up inside the rubber feet on the synthesizer.
If you don't have access to metric hardware I'd say try using 3/8ths and maybe use a piece of paper as a shim - the holes are sized at 9.8mm.