Apeks RK3 Bungee
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to replace the spring with a bungee on the Apeks RK3 fins.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 15
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A adapter to replace the spring on the Apeks RK3 diving fins with a 7mm bungee.
I had difficulties to get on the RK3's because of the stiffness of the spring, so I replaced it with a bungee.
The adapter is attached using two 4x40mm bolts for each adapter (four in total). Like these: https://www.rvspaleis.nl/bouten/binnenzeskant/din-912/din-912-[-]-a4/din-912-[-]-a4-[-]-m4/912-4-4x40_1
The inner part of the handle on the RK3's has been cut away to easily grab it with a finger.
Disclaimer: Due to the design program I used, most models need to be rotated 90deg.