Willys MA Prototype Jeep Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The one that came just before the one we all know and love
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: MAv2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Esun Black Transmission Distance: 0.1
PLA+ Esun Olive Green Transmission Distance: 1.5
PLA PolyLite Pro Army Beige Transmission Distance: 1
PLA+ Esun Bone White Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Olive Green
At layer #15 (1.28mm) swap to Army Beige
At layer #18 (1.52mm) swap to Bone White
At layer #23 (1.92mm) swap to White for the rest.