Core One Spool Holder - Larger Diameter and End Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A larger diameter spool holder for the Core One with a screw on end cap.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 39
- Makes
- 0
- Views
- 377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A spool holder for the Core One with a larger diameter, to prevent the spool scraping the printer case as it revolves.
A screw-on end cap is added to prevent the spool being pulled off, which occasionally happens when the reel is coming to the end and if the filament is badly wound and tangled on the reel.
The model was printed in PLA filament with a 0.4mm nozzle, a layer height of 0.2mm and with 15% infill. No supports are required.
The spool holder is attached with the original screws provided.
A Core One logo disc, to be glued to the end cap, is provided if required.