Benchy Nautilus: brass dreams in a pressure hull
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A submarine Benchy inspired by 20,000 Leagues Under the Sea, featuring a transparent dome made with balloon and resin
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 93
- Makes
- 0
- Views
- 539
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
This Benchy doesn’t float—it lurks. Inspired by Jules Verne’s 20,000 Leagues Under the Sea, it’s a desktop-sized tribute to Victorian ambition, mechanical elegance, and deep-sea vengeance. The hull is plated like a leviathan, the portholes stare like curious sea eyes, and the transparent dome reveals a tiny interior where Captain Nemo might be sipping brandy and plotting the downfall of surface dwellers.
Painting this beast is like restoring a lost relic. Copper and brass should duel across the hull while teal verdigris creeps into the seams like forgotten algae. Portholes should glow with submarine melancholy. And the dome? It’s your storytelling window—make it gleam, make it mysterious, and yes, you can build it with a balloon and resin.
⚙ Print Settings
- Technology: FDM
- Layer height: 0.16 mm for crisp rivets and panel lines
- Supports: ON (dome opening, fins, propeller, conning tower lip)
- Print time: ~4 hours
- Material: ~50 g PLA
- Color: neutral or mid-brown for flexible metallic painting
🎈 Easy Dome Method: Balloon + Resin
Skip the silicone molds and lab gear—this method is clever, fast, and surprisingly elegant:
- Inflate a transparent balloon Use a small, clear latex balloon. Inflate it slightly to get a smooth, rounded shape.
- Dip it in clear resin Prepare clear epoxy or UV resin. Dip the top of the inflated balloon into the resin, or brush it on in layers. Hang the balloon upside down to cure in a dust-free space. If using UV resin, cure gently to avoid overheating the latex.
- Cut the dome Once cured, deflate the balloon and cut the hardened resin shell with sharp scissors or a hobby knife. You’ll get a thin, curved dome—perfectly shaped and crystal clear.
- Fit it to the model Place the dome over the conning tower. If needed, print a PLA ring to hold it in place and hide the edge. Use canopy glue or clear PVA to bond it without fogging.
- Finish and polish Buff the dome with plastic polish or apply a drop of gloss acrylic varnish. For extra depth, tint the inside with transparent smoke or add a tiny interior detail like a map or valve.
It’s the MacGyver method of underwater modeling: one balloon, a splash of resin, and a whole lot of glory. Nemo would be proud.
🎨 Painting Tips
- Primer: black or brown to keep metals warm
- Metals: alternate copper and brass; edge highlight with bright brass or gold mix
- Verdigris: thin turquoise glazes in rivets and seams; keep upper surfaces clean for contrast
- Portholes: dark teal base, crescent highlight, gloss finish
- Dome: keep crystal clear; polish with microfiber or gloss varnish
- Weathering: oil streaks, graphite rubs, and subtle scratches for a burnished, sea-worn look
“The ocean is everything. It’s deep, mysterious, and smells like fish. Seven-tenths of the Earth is covered in it, which means statistically, you’re more likely to drown than find true love. But hey, at least you’re never alone—unless you’re stuck in a submarine with a guy named Nemo who has serious daddy issues.”