Print in place chain with cuban links
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
long, durable and easy to print. Comes in 120 cm and 2 m length. Great for costumes, props and decoration.
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 193
- Makes
- 0
- Views
- 705
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
IMPORTANT: The chain needs to be sunk into the bed by lowering it by a millimeter to achieve a proper base layer. If you need a custom length, you can use 3D Builder to remove individual links or copy the short “chain.3mf” in the slicer as many times as you need and combine it by manually dragging the copies into position.
This should be printed with PLA to get clean overhangs. Make sure you have good bed adhesion.
Suggested print settings:
layer height 0,2 mm
first layer extrusion width 0,8 mm (to ensure good adhesion)
extrusion width = nozzle diameter
Fan = 100%
NO SUPPORTS