QIDI Q1 PRO Bed Levelling Knob V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Resized version. Z height loss issue addressed.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 69
- Makes
- 1
- Views
- 420
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I am not happy with the factory knob and lock nut, thus I have designed this to be able to insert a lock nut during print.
There are 60 notches to match 60 minutes.
This is V2. Thanks to @Matteo_Fey_3398928 for pointing out that some Z height is lost.
The overall height of this one is 16 mm. The previous one was 27.7 mm
The neck height is now 8 mm. I believe the clearance under the carriage is about 6 mm.
Insert pause at layer #71.
25.08.2025: I have replaced my stock Qidi knobs with these ones. I can confirm adjustments were easier to perform.
02.09.2025: Knob resized to avoid any Z axis height loss after community suggestion.