1 / 3
OnStep Smart Hand Controller 2 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the OnStep Smart Hand Controller 2 which can be easily printed without support.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a case for the OnStep Smart Hand Controller 2, printed in 2 parts. It can be printed without support. Assembly requires four M3x20 or M3x24 hex head screws, which screw directly into the print as these should not need to be removed often.
Made to fit 1.6mm PCBs but should work on 2mm PCBs as well, the gap between the halves will just be a bit bigger. Fits the 1.54" LCD Screen.
Print both halves laying flat on the top/bottom faces. Print both halves laying flat on the top/bottom faces.