1 / 4
Neodymium magnet holder for power strip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket for replacing stock 20x30x3mm magnets to 10x10x3mm neodymium magnets.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
I had a problem with my power strips - their magnets weren't powerful enough, and was slipping.
This mod replaces those 20x30x3mm ferrite magnets to 4x (not-so-cheap) Chinese 10x10x3mm neodymium magnets.
Things to prepare
- Buy the number of magnets required. I used 10x10x3mm magnets, but 10x20x3mm ones should work too. 4 magnets per 1 ferrite magnet is needed, or 2 if you're using 10x20x3mm ones.
- Get some epoxy glue, or glue that sticks well on metal and doesn't have problems with mechanical shock. I.e. NO CA GLUE! (although it should work, I cannot guarantee its long-term reliability)
- Get some thin anti-slip sheets. I used these ones, but any sheet should work.
- Use a slicer with polyhole generation. I like to use superslicer myself.
Installation
- Use a screwdriver to remove the original magnets.
- Sandwich the printed bracket with the original metal one, and the magnets.
The magnets should be placed in opposite directions. (If one has S facing up, the one next to it should be N up) - Once checked it can be aligned, disassemble and put glue between the parts.
You might want to have some cooking sheet underneath to protect your desk from spilling glue. - Cut the anti-slip mat in the desired shape (10x30mm), and use glue to stick on the magnets.
Note that it should cover the highest point in your setup - usually the surrounding metal part.