Tent Peg - Chunky REMIX - screw insert and remove by hand.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tent peg that can be screwed into the ground by hand, with bigger flutes and fixed handle compared to original.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 135
- Makes
- 2
- Views
- 387
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple peg you can hand-screw into the ground.
Standard print settings apart from…
5 Walls
30% Lines infill
Slow 1st layer (I used 20mm/s and then 60mm/s for the rest, 60 being my printer's max)
Support “everywhere” with overhang angle 50deg and 15% zigzag, and a 2 line brim.
You may be able to do without the brim but it made printing easier on my Elegoo Neptune3Pro. If you go without the support then the tip is going to be a bit gnarly :o)
Please Like this model if you find it useful.
If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)