1 / 8
Google Pixel 10 Pro XL, wireless charger stand, for only 5 Euro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For this project you need the PCB and coil from IKEA "LIVBOJ"
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 10
- Makes
- 0
- Views
- 1,116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
You will need to separate the coil and the circuit board and add some cables, as shown in the pictures. Then you can use some hot glue to hold the circuit board and coil in place. You may want to consider adding more top layer, bottom layer, and perimeters within the “.3mf” file.
You may use a knife to separate the coil and the magnet disk from the plastic housing, to avoid creaking the fragile magnet disk.
Link to IKEA LIVBOJ
https://www.ikea.com/se/en/p/livboj-wireless-charger-black-40447051/