1 / 3
Magnetic PokeBox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for use with four of 6x3 magnets, two M3*35 screws and two hexs nuts.
If you want them print one by one:
Pokebox_Magnetic_Separate_BOTTOM.stl
Pokebox_Magnetic_Separate_TOP.stl
If you want to print it at once:
Pokebox_Magnetic_Whole.stl
to fill the pokehole with:
pokeball-half.stl
pokeball-MiddleButton.stl
- Rafts:
Yes
- Supports:
No
- Resolution:
300
- Infill:
20%
- Filament brand:
anyting
- Filament material:
PLA-PETG