Minimal K-Cup recycler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I use mine a lot. I've grown tired of twisting the threads off for the assembly bolts as well as the ejector bolt even…
- Rating
- 4 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 1
- Views
- 681
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I use mine a lot. I've grown tired of twisting the threads off for the assembly bolts as well as the ejector bolteven with my reinforced remix.
This remix provides yet another alternative. I've eliminated the assembly nut and bolt combination, so you'll need to provide your own. I use bolts that are no larger than 7.5 mm in diameter andat least 25 mm in length. I've also eliminated the ejector and provided a clip-held plate because I'd rather not use glue, and I prefer to pull off the top of the cut K-cup with my finger tips rather than re-tightening the nut (eventually twisting the threads off for that, too) when it becomes loose every few days.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
200 (.2 mm)
Infill:
15-25% . Use 3 shells
Filament: Any brand filament PLA Any color filament
Notes:
There's been some tweaking of some of the parts, better print them all even if you have a working recycler.
Listed at Thingiverse as remix of
K-Cup Recycler v6
https://www.thingiverse.com/thing:4683310
Category: Gadgets