Bb Bugle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple bugle prototype.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 69
- Makes
- 0
- Views
- 615
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
Print:
4x curves;
3x tubes;
1x bell;
1x tudel.
Joints are optional, but these are the quantities:
2x joint2;
1x joint1, joint 3.
------------------------- ///// ---------------------------------------------------- ///// ---------------------------
This is just an experiment to hear how good (or bad) a plastic brass instrument sounds.
It should be tuned to Bb3 (~233Hz) at 20°C, since its full length is ~148mm. Works with standard trumpet mouthpieces. Sounds pretty alright.
I recommend using CA glue to join the parts. I uploaded the tube joint models, but I ended up just gluing them all together.
I found that this model is pretty fragile and not that airtight, probably because it only has two walls on most of the print. Also, it requires a pretty big printer to make.
I will publish an updated model in the future.