Alternator herb grinder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pocket size herb grinder with an automotive touch
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone.
I made this a few years ago and downloaded both models from Thingiverse, but the alternator (part of Mazda RX7 rotary engine https://www.thingiverse.com/thing:4709639 ) is not there anymore. I thought I've lost the model files when my hard drive in my old computer broke down. Fortunately I stumbled upon a backup drive collecting dust and containing the files, so I can share them here.
Print with at least 3 perimeters and 20% infill, otherwise it can come apart (I learned the hard way). Enable supports for top and bottom covers, other parts don't need any. Also I printed both covers in PET-G, all other parts in PLA. For assembly I used hot glue for the bottom cover and bowl and superglue and small screws for the top cover and blades. For cosmetic parts I used superglue for the “plug” and a small bearing with M3 screw and nut for the pulley, so it can rotate.
I personally prefer the inverted plate, because it produced better results with less effort.
Excuse my English, I'm doing my best.
Happy grinding