1 / 3
Toyota Hiace Rear Speaker Mounting Parts (Compatible with TS-F1040-2) — image 1
1 / 3

Toyota Hiace Rear Speaker Mounting Parts (Compatible with TS-F1040-2)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Auxiliary parts for installing speakers in the rear seats of a Hiace.

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
186
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

Overview

To address the issue of poor sound quality in the rear seats of a Toyota Hiace, we designed a 3D-printed part for installing a Carrozzeria TS-F1040-2 speaker in the ceiling space next to the factory air conditioner. This part consists of a formwork that assists in accurate drilling of holes in the ceiling trim and a reinforcing part that secures the speaker by fastening nuts to the back of the trim.

Background and Purpose

Audio sound is difficult to reach in the rear seats of a Hiace, and the sound quality of the factory speakers tends to be lacking. 

Therefore, we improved the sound quality by installing the TS-F1040-2 speaker in the ceiling. 
However, the factory mounting clips were not strong enough, and the two-point ceiling attachment was unstable.

To solve this problem, we 3D-printed a special part that ensures accurate positioning and a strong attachment.

Part Features

Cutout mold

A guide for accurately installing the TS-F1040-2 speaker in the ceiling trim. The symmetrical design allows it to be flipped over for use on either the left or right side. The screw holes are located in the upper left and lower right. Four holes are provided, taking into account the hole positions when the speaker is turned over. An arrow (printed data recessed 0.2 mm) is provided on the front to indicate which hole to use.

Recommended: Painting the formwork makes it easier to distinguish between left and right holes and prevents installation errors.

Nut Fixing Reinforcement Parts

Installed on the underside of the interior trim, these parts securely hold M5 nuts to secure the speaker in place.
Compensating for the weakness of the original clips, the M5 button bolt and nut secure the speaker, ensuring stability even during vibrations and swaying while driving.
Provides a more reliable alternative to the original clips.

Compatible Speakers

Carrozzeria TS-F1040-2

BOM

  • M5 Button Head Bolts 12~15mm: 4
  • M5 Nuts: 4 or M5 Square nuts :4
  • Instant Adhesive Adhesive
  • Masking Tape

Print Settings

Cutout mold

Material: PLA
Layer Height: 0.2mm
Supports: None

Reinforcement parts

Material: ABS
Layer Height: 0.2mm
Perimeter: 4
Top , Bottom layer: 4
Infil: 30%
Supports: None

How to Use

  1. Check the arrows on the formwork and paint them correctly.
  2. Set the M5 nuts on the reinforcing parts. Secure the nuts in the recesses of the parts with adhesive (epoxy or strong instant glue recommended) to prevent the nuts from coming loose during installation.
  3. Use the formwork to mark the speaker mounting holes on the ceiling lining and carefully cut them.
  4. Connect the speaker wiring and check speaker operation.
  5. Prior to installing the speakers, place the reinforcing parts behind the lining and temporarily secure them to the lining with M5 button bolts to ensure they are securely fastened. Secure the reinforcing parts and the back of the lining with adhesive tape to prevent them from moving when fully secured.
  6. Align the TS-F1040-2 speaker with the part and secure it with the M5 button bolts.

Important Notices

Check the vehicle's interior trim and wiring structure before installation.
Drill carefully to avoid damaging other vehicle components. 
Confirm the strength of the 3D printed part before installing.
When using adhesives or tape, work in a well-ventilated area and follow the instructions. 
Use at your own risk!

Tags