1 / 6
Sun Visor Shield for EKIY MTC-14 Screen 6.3"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sun Visor Shield for EKIY Wireless CarPlay Moto Android Auto 6,3"
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 62
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sun Visor for EKIY 6.3" MTC-14 Wireless CarPlay / Android Auto Display
Device
I got this Display for my motorcycle from AliExpress "EKIY Wireless CarPlay Moto Android Auto 6.3 inch GPS Motorcycle Navigation Display Screen Portable Digital Motorcycle Dashboard"
https://de.aliexpress.com/item/1005007986846517.html
Print & Install
- I used PLA+ because I had nothing else at hand - TPU or PETG might work great
- no supports needed, the small support lip at the bottom can be just broken off after print
- add some double sided tape to keep it in place
PSA How to change to boot and start logo images for EKIY 6.3" MTC-14
Additional info for Users of this Display - got nothing to do with 3D printing 😄
(because I searched very long for it)
- you'll need an MicroSD Card to insert it at the bottom of the device (behind a small cover with two screws)
- empty and formatted in FAT32
- Images have to be
- correct aspect ratio (65 : 30), so here are some possible resolutions
- 1560 x 720
- 1300 × 600
- 1170 × 540
- 1040 × 480 (I preferred this one)
- JPG / JPEG
- smaller than 100kb
- correct aspect ratio (65 : 30), so here are some possible resolutions
- create a directory “Logo” in the MicroSD and put your images there
- they should show up in the settings > general