Kazanjuu Holy Dragon : Bikkuriman Kanjuku Haou
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.59 – €1.95 net (excluding VAT)
For file: stickerdragon_0.4n_0.15mm_PLA_COREONE_1h58m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.77 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.97 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Kazanjuu Holy Dragon : Bikkuriman Kanjuku Haou : Sticker Experiment.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 10
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Kazanjuu Holy Dragon : Bikkuriman Kanjuku Haou : Sticker Experiment.
Probably most useful as a wall mount. Mostly this was an experiment with a game asset that was comprised of planes. Nothing was solid. So i was just busy figuring out the best way to apply the uv.. Short answer you apply the UV displacement while its still in its plane mode.. (after subdivision). Then its safe to solidify. then remesh. fix. I did a small amount of resize on the appropriate direction x or y in this case. cant remember. After export I did another solidification in Meshmixer just to make sure it would print.