1 / 2
Remix of Display stand for Sony Walkman — image 1
1 / 2

Remix of Display stand for Sony Walkman

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of Sony Walkman TPS-L2 Display Stand by RexWolf6724 on Thingiverse:…

Rating
0 / 5
Likes
3
Downloads
57
Makes
0
Views
262
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Share Alike

This is a remix of Sony Walkman TPS-L2 Display Stand by RexWolf6724 on Thingiverse: https://www.thingiverse.com/thing:6630642

I only kept the front logo part and built the rest myself. I also generated the inlayed text portion from RexWolf6724's model.

The gap for the stand part is snug for WM-FX503 model. The curves on the inside lip are meant to prevent the walkman from sliding and tipping backwards due to the non flat design of the walkman body. If you are printing this for an other model make a thin (like 10mm or so ) test print to see how your walkman fits. There's a little cavity at the rear to store a battery.

This is a two colour print and follows the procedure described in my tape deck cover ( https://www.thingiverse.com/thing:7136139 ) . I used prusaslicer: 1: Import logo first, then the stand. Make sure to orient the stand so it' sits face down. 2:Align them to eachother. 3: Make the cover unvisible and apply slicing settings to the logo. Export gcode. 4: Make the logo unvisible and the cover visible and apply slicing settings. You will need supports for this print and print orientation. Export gcode.

Print logo first. Then change colour and print the stand on top of the logo.

NOTES: make sure you have appropriate Z hop (or equivalent for your slicer) so your nozzle doesn't drag onto the logo. The layer orientation might make a visual difference when printing the logo and the stand so beware of that.

Category: Audio

Tags