Spidey 3D Poster Hueforge

I got Hueforge a little while ago just for fun. This is my first original model I created.

I only used AI to create the painting style of the image*.

Although this is sliced for a multi-tool 3Dprinter,  you can print this on most 3D printers either with a single extruder / AMS set up or manual filament changes. For 4 spool AMS systems, Yellow can be excluded (it will print in white) or do a manual colour swap.

I have put “mouse ears” on the corners to prevent warping. They can be easily clipped off after printing

*You may have to scale the X and Y axis down to fit your printer but, DO NOT scale down the Z axis or this print will not work. After doing a global scale reduction (or enlargement), manually set the Z height to 2.64mm

I used the following PLA filaments:

• Prusament Galaxy Black
• Prusament Lipstick red
• Prusament Pineapple Yellow
• Prusa White
• Polymaker Grey

Set the first layer at 0.16mm and all other layer at 0.04mm

Filament changes / swaps should be sliced at the following layer heights:

• Start with Black
• at 1.36mm swap to red
• at 1.52 swap to grey
• at 1.6 swap to white
• at 2.32 swap to yellow

*TBH, as soon as you use a calculator or anything more advanced to produce a result, it's AI assisted. Using a 3D printing slicer programs using AI to write the code our printers need to print

Follow me on:

• Instagram.com/ozzy_artist
• X (Twitter): @Ozzy_The_Artist
• Your support by joining my Printables Club here would also be appreciated :o)