1 / 6
Improvement for windlass LEWMAR "Pro Series"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Increased contact area with the chain
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
To prevent this damage (see last picture), I increased the control arm's support surface (from 10 mm to 20 mm).
Installed on a Windlass LEWMAR Pro Series 1000
Material: PETG (this prototype; next 3D print with ASA)
Layer height: 0.2 mm
Nozzle: 0.4 mm
Printed on Prusa Mini
→ countersunk screws M8x20 and M8 nuts (2 pieces) needed!