1 / 4
Silent chamber cooling. Using the advanced filtration fan.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
using only the fan for cooling the chamber, wich is much more silent.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
After i read, that the fan from the advanced filtration system is quite than the 2 chamberlains, i bought the AFS. but since my space is very limited the system is too thick for me. Since i mostly print petg and pla i made an adapter so i only have the fan with an exhaust to the side.
Works like a charm for me and reduced the noise a lot.
you will need two , longer 5mm screws and 4 longer 3mm screws. (I put some soft, 1mm thick, self adhesive strip for better sealing between printer and fan housing.)