XL650 adapter for Lee Funnel Case Collator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter to allow use of the (inexpensive) Lee funnel case collator with the Dillon XL650, and perhaps other…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 40
- Makes
- 0
- Views
- 634
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- GNU General Public License v2.0
This is an adapter to allow use of the (inexpensive) Lee funnel case collator with the Dillon XL650, and perhaps other Dillon progressive presses.
It snaps on the outside of a standard Dillon case feeder tube, and uses a 1/4 x 3" bolt with two nuts to hold the funnel assembly above the tube so you can load up the funnel tubes and turn them to drop cases as you go.
I steady the funnel with the plastic tube clip that came with the machine, presumably for the expensive mechanical collator they sell. A purpose built arm with a collar that goes around the tubes would probably work well, but I've never bothered to make one.
Sketchup files included if you need to embiggen it.
Print Settings
Printer:
MakerFarm
Rafts:
No
Supports:
No
Resolution:
.30
Infill:
40
Notes:
One of my first ever prints, I don't remember much about it.
Snap on Dillon drop tube, put bolt and nut in funnel assembly and put bolt down through the adapter small side. If it slides on adapter, you might need another nut on the top of the adapter to keep it high enough to spin over drop tube.
Category: Sport & Outdoors