Valve cap for GVS SPR644 ELIPSE P100 Elastomeric Half Mask Respirator with Source Control
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap for covering the vestigial exhale valve on the GVS SPR644 ELIPSE P100 Elastomeric Half Mask Respirator with Source…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cap for covering the vestigial exhale valve on the GVS SPR644 ELIPSE P100 Elastomeric Half Mask Respirator with Source Control (https://smile.amazon.com/dp/B095YBV2T9) to make it more clear to others that there is no unfiltered exhale valve.
This is meantONLY FOR USE WITH THE SOURCE CONTROL VERSION of this mask and is NOT a replacement for the internal plug which closes off the exhale value. This is intended to havecosmetic value ONLY to put others at-ease and is not intended to for any functional purpose. There has been NO TESTING of this version, so use at your own risk. FDM prints can be porous and hard/impossible to sanitize, so should not be used in any medical, healthcare, food preparation, or other environment where this is a concern.
How I Designed This
Designed in FreeCAD. See the FCStd file included if you wish to make modiciations.
Category: Accessories