Rancilio Rocky Spout
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.79 – €2.19 net (excluding VAT)
For file: spout v2_0.4n_0.2mm_PETG_COREONE_1h43m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.99 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 1.71 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
hinged spout for the Rancilio Rocky Coffee Grinder
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 59
- Makes
- 1
- Views
- 238
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This spout for the Rancilio Rocky has an integrated hinge so the top can be lifted to clean out any coffee buildup in the spout, rubber gasket, or internal chute. This also allows for some inspection of the internals of the grinder. This is intended to be used with the 45degree tilt (which set the angle of the spout) and bellows.
The assembly model below was sourced from Onshape, but the Spout and interface details is my design based on my physical measurements of the machine.