LAGKAPTEN - SKADIS vertical mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a vertical mounting foot for the IKEA product, Skadis.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 22
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a vertical mounting foot for the IKEA product, Skadis.
It is designed to be used with the LAGKAPTEN board, also from IKEA, but is compatible with any 35mm thick board.
For the Skadis board to be securely mounted, two 20x20 aluminum profiles are required, tall enough to be hidden behind the board you will be using.
I recommend printing it with four perimeters, five top and five bottom.
Rectilinear infill.
The pieces are now correctly oriented, and both can be printed at the same time on the Prusa mini printer. If the adhesion to the print bed is good, supports are not necessary.
For added security, you can use a brim or even add supports on the back.
To attach it to the board, you will need four 5mm wood screws 20mm long
To attach the profiles, you will need two 4mm screws, and the profiles must have a center thread.
To fix the SKADIS panel to the profiles you will need 4 M4 screws of 100mm and 4 T nuts