ResMed N30i/P30i to F20/F30i/X30i-style Headgear Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for the ResMed N30i/P30i frame to allow use of F20/F30i/X30i style headgear
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 51
- Makes
- 0
- Views
- 1,023
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What is it?
An adapter to allow the use of magnetic four-point headgear like from the ResMed F20, F30i, etc. on the Airfit P30i / N30i frame.
Why?
The back of my head is not well-shaped to retain the normal headgear for the ResMed P30i/N30i CPAP mask, so over the course of the night, I would keep having to re-adjust my mask to prevent leaks. The F30i / X30i full-face mask uses a similar frame, but adds magnetic mount clips just below where the face mask attaches to allow for balanced pressure high and low to hold the mask in place. The F20 mask has a similar mount, but additionally adds a “ring” around the top/back of the head.
What magnets do I need?
The buttons on ResMed masks are 13mm normally, but have enough room to be up to 15mm (my buttons are 14.5mm). I used 12mm diameter x 3mm thick round magnets (available from Amazon or your magnet supplier of choice). The slot is 10mm wide, so the magnets should be secure once inserted in the print (check polarity to ensure it matches your strap before you insert the magnets!)
These are the specific ones I used (non-affiliate link): https://www.amazon.com/dp/B0D576LLR5/
Printing details
Nothing fancy - like most things printed with TPU, slow down. I sized it for the Voron “standard” print parameters (0.2 layer, 0.4 nozzle, 0.4 line width). The part provided is for the left side - just get it standing up on the flat face and then clone / mirror across X.
Warnings:
ResMed puts warnings / contraindications on all of their masks / headgear that use magnets. These apply to these printed parts as well once magnets are installed. Use at your own risk.
