Honkus Ponkus - Halloween Duck Goose Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A whimsical Halloween goose dressed as a witch, flying on a broom with a black cat, bats, and potion—perfectly spooky.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 24
- Makes
- 1
- Views
- 104
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
Add a dash of humor and magic to your spooky season with the Honkus Ponkus – Witchy Goose Magic design. Featuring a goose in a purple witch hat soaring on a broomstick while clutching a bubbling potion, this playful piece is accented with bats, stars, and a loyal black cat sidekick. A lighthearted twist on Halloween décor, it’s ideal for goose lovers, Halloween fans, or anyone who enjoys a mix of spooky and silly. Perfect for seasonal decorating, gifts, or year-round witchy vibes.
Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.
Project: Honkus Ponkus.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#292036 PLA PolyLite Pro Dark Purple Transmission Distance: 0.3
#6f4ab2 PLA Overture Purple Transmission Distance: 1
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#e4bb4c PLA Overture Matte Yellow Transmission Distance: 3.6
#cbc6b8 PLA BambuLab Matte Bone White Transmission Distance: 1.6
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 9 unique filaments
Swap Instructions:
- Start with Black
- At layer #8 (0.72mm) swap to Dark Purple
- At layer #9 (0.8mm) swap to Purple
- At layer #11 (0.96mm) swap to Blue Gray
- At layer #14 (1.2mm) swap to Brown
- At layer #17 (1.44mm) swap to Pumpkin Orange
- At layer #19 (1.6mm) swap to Yellow
- At layer #21 (1.76mm) swap to Bone White
- At layer #23 (1.92mm) swap to Ivory White for the rest.
Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.
One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:
![]() | ![]()
If you have more than one AMS or are manually changing filaments, |

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. It ties together the recurring “Summerween Vibes” theme while still leaving room for the playful ghost, witchy, and squad designs included in the set. Mix and match panels for a seamless look across your shelves, or gallery wall this spooky season!
🎃👻🌞 Hueforge: Spooky Summerween Collection 🌊🕷🦇
Want to sell your physical prints or access to the entire collection? A commercial and full access license is available through my profile.
This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of digital tools to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.

