1 / 3
Sword Wall Mount - Lord of the Rings — image 1
1 / 3

Sword Wall Mount - Lord of the Rings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The White Tree of Gondor holds your mighty blade aloft with this Lord of The Rings inspired sword wall mount.

Rating
5 / 5
Likes
71
Downloads
276
Makes
2
Views
1,024
Reviews
1

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution

Printing Instructions

  • Profile: A printing profile with higher strength is recommended. (Swords can be heavy!)

  • Supports Not Needed: Supports not required, but may help with some of the bridging.

Additional Materials

  • 2x M3x12mm Screws: Two screws to attach the arms to the shield plate.

  • 2x M3 Nuts: Two M3 nuts glued into the back of the arms provide extra strength for the inserted screws.

  • 2x Drywall Anchor screws: Two screws and anchors to attach the cleat to the wall.

  • Paint (Optional): Metallic paint for the inner relief of the crest.  Optionally, alternate filament with a MMS printer.

  • Wood PLA (Optional): Wood PLA as pictured will achieve the intended look of the sword mount.

Assembly Instructions

  • Paint Shield: Use the paint shield if using spray paint in the crest relief.  Denatured alcohol works well to clean up over-spray without damaging PLA.

  • Sword Mount Arms: Glue and insert M3 nuts into the designated slot on the back of the arms.  M3 screws secure the arms to the shield/crest of the sword wall mount

  • Wall Mount Cleat: The cleat should be leveled and attached to the wall via drywall anchors.  when placing the shield section onto the cleat, hold it at an angle and use a bit of force to snap it in (the fit will be tight).

  • Outer Band (Optional): Provided as a separate file if you don't have an MMS printer, have too little print plate space, or just prefer the look without the band.  if printing separately, glue to the outer edges of the rest of the shield.  The tolerances are tight, and may require some clamping for a perfect fit.

  • Wood Grain Patterning (Optional): The wood grain patterning seen in the pictures is a slicer effect, achieved via the tutorial linked here.

Description

Hang your weaponry with pride using this Lord of the Rings inspired wall mount!  Affixed with the sigil of Gondor, the mightiest realm of men, this wall mount will be sure to inspire your allies and strike terror into the hearts of your foes!

Added svg files for laser cutting.

Tags